Filter
Top Products
Chapter 3 Installation and Connections 47
(GB)
Chapter 3
Basic System Connection
To supply power to the camera, use the CMA-D2/D2MD/
D2CE/D2MDCE/D3/D3CE camera adaptor.
The camera adaptor you can use with your camera varies
with the signal systems and uses.
Note on connections
Be sure to turn off the power supply for all equipment
before making any connections.
System
Use
Medical
Non-medical
EIA standard, NTSC
color system
CMA-D2MD
CMA-D2
CMA-D3
CCIR standard,
PAL color system
CMA-D2MDCE
CMA-D2CE
CMA-D3CE
Using the CMA-D2/D2MD/D2CE/D2MDCE
camera adaptor
There are two methods for connecting the camera and the
camera adaptor.
• Using the CCDC cable which only supplies power to the
camera (For connecting method, see page 48.)
• Using the CCMC cable which supplies power to the
camera and transmits video signals to the camera adaptor
(For connecting method, see page 49.)
Note
Be sure to use one camera adaptor for each DXC-390/390P
unit.
Although the CMA-D2/D2MD/D2CE/D2MDCE camera
adaptor has two CAMERA connectors (4-pin and 12-pin),
the power consumption of the camera is such that two
camera units cannot be connected at the same time.
Using the CMA-D3/D3CE camera adaptor
The connections using the CMA-D3/D3CE camera adaptor
supply power to the camera and transmit video signals to the
camera adaptor. (For connecting method, see page 52.)