Filter
Top Products
30 (GB) Chapter 2 Operation
Chapter 2
Adjusting and Setting with Menus
FILE SELECT
Selects the file A or B.
LOAD
Sets the setting to be stored into the file which you select
with FILE SELECT, and stores the setting.
Storing the setting
1 Select A or B into which the setting is stored in the
FILE SELECT setting.
2 Press the V or v button to select LOAD.
3 Press the B or b button to select the desired setting to
be stored, and press the ENTER button.
“Overwrite OK?” appears.
4 Press the ENTER button.
If you do not want to store the setting, press the MENU
button.
SCENE FILE menu
Sets the preset menu settings.
The camera has two memory files (A or B) for storing the
menu settings. You can store a different type of setting into
each file, and switch to the file most suitable for the
shooting conditions quickly. The currently selected memory
file is shown in the upper right corner of the on-screen
menu.
Setting items in the SCENE FILE menu
<SCENE FILE>
>FILE SELECT
LOAD
[A]
A
Select Back
MENU
Selection
STANDARD
MICROSCOPE
FULL AUTO
STROBE
FILE B (or A)
Type of setting
Suitable for a camera used as a permanent fixture.
Suitable for a camera for a microscope.
Automatically adjusts settings.
Suitable for stroboscopic shooting.
When copying the settings between two files.
Setting item
FILE SELECT
LOAD
Contents of setting
Selects the file into which you store
the setting.
Selects the type of setting to be
stored, and loads it.
Ref. page
30
30