Filter
Top Products
Menu item details
(Single-shot AF):
The product locks the focus when the focus adjustment is achieved. Use [Single-shot AF] when
the subject is motionless.
(Automatic AF) (default setting):
[Single-shot AF] and [Continuous AF] are switched according to the movement of the subject.
When the shutter button is pressed halfway down, the product locks the focus when it
determines that the subject is motionless, or continues to focus when the subject is in motion.
During continuous shooting, the product automatically shoots with Continuous AF from the
second shot.
(Continuous AF):
The product continues to focus while the shutter button is pressed and held halfway down. Use
this when the subject is in motion.
(DMF):
Allows you to use manual focus and auto focus in combination.
(Manual Focus):
Adjusts the focus manually.
Note
If the subject is too close, the image may show any dust or fingerprints on the lens. Wipe the
lens with a soft cloth, etc.
Once you change the focus method, the distance of the focus you set up is cleared.
When [Focus Mode] is set to [Continuous AF], the beep does not sound when focus is
achieved.
[Automatic AF] is available only when you are using a lens that supports focal plane phase
detection AF.
When [Focus Area] is [Wide] or [Zone], the focus range finder frame may change after you
achieve focus using [Automatic AF] mode.
[47] How to Use
Using shooting functions Adjusting the focus
Focus Area
Selects the focusing area. Use this function when it is difficult to get the proper focus in auto
focus mode.
1. MENU → (Camera Settings) → [Focus Area] → desired setting.
Menu item details
Wide: