Filter
Top Products
[76] How to Use Using shooting functions Adjusting the exposure
Zebra
The zebra pattern will appear over the part of an image if the brightness level exceeds the IRE
that you set. Use this zebra pattern as a guide to adjust the brightness.
1. MENU → (Custom Settings) → [Zebra] → desired setting.
Menu item details
Off (default setting):
Does not display the zebra pattern.
70/75/80/85/90/95/100/100+:
Adjusts the brightness level.
Note
The zebra pattern is not displayed during HDMI connection.
[77] How to Use
Using shooting functions Adjusting the exposure
Exposure Set. Guide
You can set whether to display a guide when you change the exposure.
1. MENU → (Custom Settings) → [Exposure Set. Guide] → desired setting.
Menu item details
Off:
Does not display the guide.
On (default setting):
Displays the guide.
[78] How to Use Using shooting functions Adjusting the exposure
Exposure step