Filter
Top Products
7
Foreword
Foreword
Before Use
After purchasing this unit, before operating, it is necessary
to set the region of use and the frame frequency.
(Unless these settings are made, the unit will not operate.)
For details of these settings, see “Setting the Area of Use
and the Frame Frequency” on page 37.
Model Distinction Marks Used in
This Manual
Indications of functions specific to particular
models
This manual describes three models: PDW-F330L, PDW-
F330K, and PDW-F350L.
These models are divided into the PDW-F330L/F330K
and the PDW-F350L. The following model distinction
marks are used to indicate functions, switches, indications,
etc. that apply only to one or the other.
Specific functions, switches, indications, etc., for the
PDW-F330L/F330K
Specific functions, switches, indications, etc., for the
PDW-F350L
Frame frequency indications for interlaced
signals
In the menus of this unit, the frame frequency of an
interlaced signal is shown as “60I” or “50I”, with a capital
letter, but in this manual these are shown as “60i” and
“50i” with a lower-case letter.
For progressive signals, both menus and manual use a
capital letter (e.g. “30P”, “25P”, “23.98P”).
F330
F350