Sony PMW-500 Camcorder User Manual


 
Menu List
118
Chapter 6 Menu and Detailed Settings
VF Setting
Makes settings
related to the
viewfinder screen.
Color
b)
–99 to ±0 to +99 Adjusts the density of the colors
displayed in the viewfinder screen.
Mode
b)
Color/B&W Selects the display mode of the
viewfinder.
Color: Color
B&W: Monochrome
Peaking Type
b)
Normal/Color/Both Selects the peaking type.
Normal: Normal peaking
Color: Color peaking
Both: Both
Peaking
Frequency
b)
Normal/High Selects Normal or High as the peaking
frequency.
Peaking Color
b)
White/Red/Yellow/Blue When the Peaking Type setting is Color,
selects the peaking color from among
White, Red, Yellow, and Blue.
VF Detail Level
c)
–99 to ±0 to +99 Adjusts the detail level (set on the
camcorder) of the viewfinder
Color Peaking
Level
b)
Low/Mid/High When the Peaking Type setting is Both,
selects the color peaking level from
among Low, Mid, and High.
Marker
Makes settings
related to marker
display in the
viewfinder screen.
Setting On/Off Turns all markers on or off.
Note
When Marker is assigned to the ASSIGN.
2 switch, this setting is disabled.
Center Marker 1/2/3/4/Off When the center marker is displayed,
selects the type. Select Off if you do not
want to display the marker.
Note
When three of Safety Zone, User Box,
Guide Frame, and 100% Marker are set to
[On], this setting cannot be turned on.
Center H Position –40 to 0 to 40 Specifies the horizontal position of the
center marker.
Center V Position –40 to 0 to 40 Specifies the vertical position of the
center marker.
Safety Zone On/Off Turns the safety zone display on or off.
Note
When three of Center Marker, User Box,
Guide Frame, and 100% Marker are set to
[On], this setting cannot be turned on.
Safety Area 80%/90%/92.5%/95% Selects the safety zone range.
Aspect Marker Line/Mask/Off When an aspect marker is to be
displayed, selects the display method.
Select Off if you do not want to display
the marker.
Line: Show as white lines.
Mask: Display by lowering the video
signal level of areas outside the
marker range.
Aspect Select 15:9/14:9/13:9/4:3/
1.66:1/1.85:1/2.35:1/2.4:1
Selects the aspect ratio of the marker.
OPERATION
Menu items Sub-item Settings Description