Filter
Top Products
Saving and Loading Scene Files
162
Chapter 7 Saving and Loading User Setting Data
See “Basic Setup Menu Operations” (page 109) for
information about menu operations.
1 Select FILE >All in the setup menu.
2 Select [All Preset], and then press the
MENU knob.
3 To execute the reset, select [Execute],
and then press the MENU knob.
To cancel the reset, select [Cancel], and
then press the MENU knob.
If you choose to execute the reset, all settings
in the ALL file are reset to preset values.
Scene files allow you to save the following types
of data.
• Values set in the PAINT menu
• Shutter speeds set in standard mode or ECS
mode
• White balance data
The data that is saved and loaded depends on the
setting of FILE >Reference >Scene White Data
in the setup menu.
To save a scene file to an SxS memory card, insert
the card into a memory card slot and then proceed
as follows.
See “Basic Setup Menu Operations” (page 109) for
information about menu operations.
1 Select FILE >Scene in the setup menu.
To assign a name to the data before saving
it
Assign a name before proceeding to step 2.
For details, see “To assign names to files”
(page 161).
2 Select Scene Store Mem >Excute (if you
want to save the data in the camcorder’s
internal memory), or select Scene Store
SxS >Execute (if you want to save the
data on an SxS memory card).
3 Press the MENU knob.
A list box of scene files appears.
File numbers where “No File” is displayed
are empty file numbers
4 Select the file number under which you
want to save the data, and then press the
MENU knob.
A confirmation message appears.
Resetting a File after Changing Its
Contents
Saving and Loading
Scene Files
Saving Scene Files