Filter
Top Products
Attaching the Viewfinder
38
Chapter 2 Preparations
By fitting an optional BKW-401 Viewfinder
Rotation Bracket, you can rotate the viewfinder
out of the way so that your right leg does not hit
the viewfinder while you are carrying the
camcorder.
1 Loosen the front-to-back viewfinder
positioning levers and the front-to-back
viewfinder positioning knobs, and then
pull the viewfinder slide assembly
forward.
2 Using a 2.5 mm diameter hexagonal
wrench, detach the viewfinder slide
assembly.
3 Attach the BKW-401 with the supplied
bolts.
Using the BKW-401 Viewfinder
Rotation Bracket
Viewfinder front-to-back positioning knob
Viewfinder left-to-right positioning ring
Bolts with
hexagonal
hole
Viewfinder slide assembly
Bolts supplied with the BKW-401