Filter
Top Products
123
“Memory Stick” Operations
Superimposing a still image in a “Memory Stick” on a moving
picture – MEMORY MIX
Items to be adjusted
M. CHROM The color (blue) scheme of the area in the still picture which is to
be swapped with a moving picture
M. LUMI The color (bright) scheme of the area in the still picture which is
to be swapped with a moving picture
C. CHROM The color (blue) scheme of the area in the moving picture which
is to be swapped with a still picture
M. OVERLAP No adjustment necessary
As the bar is shorter, the effect is enhanced.
To change the still image to be superimposed
Do either of the following:
– Press MEMORY+/– before step 6.
– Press the SEL/PUSH EXEC dial before step 6, and repeat the procedure from step 4
(except M. OVERLAP).
To change the mode setting
Press SEL/PUSH EXEC dial after step 6, and repeat the procedure from step 4 (except
M. OVERLAP).
To cancel MEMORY MIX
Press MEMORY MIX again.
During recording
You cannot change the mode setting.
If a still image to be superimposed has lots of white areas
The thumbnail image may not be displayed clearly.
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.
When the auto logo insert function is activated
You cannot use memory mix function.