Filter
Top Products
Editing
93
Setting the user bits value
You can set the user bits as eight-digit hexadecimal values (base 16) to have the date,
time, scene number, and other information inserted into the time code.
(1) Set the POWER switch to VCR or CAMERA.
(2) Press MENU to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select TC, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select UB PRESET, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select PRESET, then press the dial.
(6) Set up the first two digits. Turn the SEL/PUSH EXEC dial to select the
number, then press the dial.
(7) Repeat step 6 to set up the other digits.
(8) Turn the SEL/PUSH EXEC dial to select SET, then press the dial.
To cancel the user bits setting
Select CANCEL in step 8, then press the SEL/PUSH EXEC dial.
To reset the user bits
Select RESET in step 5, then press the SEL/PUSH EXEC dial.
Setting the user bits to the real time clock
Set UB TIME to ON in the menu settings. We recommend that you set the time
beforehand.
Setting time values