Filter
Top Products
Editing
81
Using with an analog video unit and a PC
– Signal convert function
You can convert the analog input signal to the digital signal and output it from the DV
Interface on this camcorder. You can capture images and sound from an analog video
unit connecting a PC which has i.LINK (IEEE1394) connector to your camcorder.
(1)Set the POWER switch to VCR.
(2)Press MENU to display the menu.
(3)Turn the SEL/PUSH EXEC dial to select , then press the dial.
(4)Turn the SEL/PUSH EXEC dial to select A/V t DV OUT, then press the dial.
(5)Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(6)Press MENU to erase the menu display.
(7)Start playback on the analog video unit slightly ahead of the point from which you
want to start capturing images.
(8)Start capturing procedures on your PC. The operation procedures depend on your
PC and the software which you use.