Filter
Top Products
142
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
To change the still image to superimpose
Do either of the following:
– Press MEMORY+/– before step (7).
– Press the SEL/PUSH EXEC dial before step (7), and repeat the procedure from step
(3).
To change the mode setting
Press the SEL/PUSH EXEC dial before step (7), and repeat the procedure from step (4).
To cancel MEMORY MIX
Press MEMORY MIX.
Notes
•You cannot use MEMORY MIX for moving pictures recorded on a “Memory Stick.”
•When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
Image data modified on your computer or shot with other equipment
You may not be able to play modified images back with your camcorder.
When you select M. OVERLAP
You cannot change the still image or the mode setting.
During recording
You cannot change the mode setting.
Sample images
•The “Memory Stick” supplied with your camcorder is already stored with the
protected 20 images :
– For M. CHROM:18 images (such as a frame) 101-0001 to 101-0018
– For C. CHROM: two images (such as a background) 101-0019 to 101-0020
•The CD-ROM supplied with your camcorder is already stored with 20 images (p. 191):
– For M. CHROM:18 images (such as a frame) DSC 00001 to DSC 00018
– For C. CHROM: two images (such as a background) DSC 00019 to DSC 00020