Filter
Top Products
219
Customizing Your Camcorder
Icon/item
TAPE SET
REC MODE
AUDIO MODE *
2)
ORC TO SET *
3)
ORC stands for “Optimizing the Recording Condition.”
q REMAIN
FRAME REC *
2)
INT. REC *
2)
Mode
z SP
LP
z 12BIT
16BIT
—
z AUTO
ON
z OFF
ON
ON
z OFF
SET
Meaning
To record in the SP (Standard Play) mode.
To increase the recording time to 1.5 *
2)
/2 *
3)
times the SP mode.
To record in the 12-bit mode (two stereo
sounds).
To record in the 16-bit mode (one stereo sound
with high quality).
To automatically adjust the recording condition
to get the best possible recording. Press START/
STOP to start adjustment. Your camcorder takes
about 10 seconds to check the tape condition
and then returns to the standby mode.
To display the remaining tape bar:
• For about eight seconds after your camcorder
is turned on and calculates the remaining
amount of tape.
• For about eight seconds after a cassette is
inserted and your camcorder calculates the
remaining amount of tape.
• For about eight seconds after N is pressed in
VCR/PLAYER mode.
• For about eight seconds after DISPLAY is
pressed to display the screen indicators.
• For the period of tape rewinding, forwarding
or picture search in VCR/PLAYER mode.
To always display the remaining tape bar.
To deactivate the frame recording.
To activate the frame recording (p. 74).
To activate the interval recording function
(p. 72).
To deactivate the interval recording function.
To set INTERVAL and REC TIME for interval
recording.
POWER
switch *
1)
VCR
CAMERA
VCR *
4)
CAMERA
CAMERA
VCR/
PLAYER
CAMERA
CAMERA
CAMERA
Changing the menu settings
*
1)
Modes on the POWER switch vary depending on models (p. 16).
*
2)
*
3)
*
4)
(continued on the following page)