Filter
Top Products
96
Using the i.LINK cable
Simply connect the i.LINK cable (optional) to DV on your camcorder and to DV IN on
the DV products. With a digital-to-digital connection, video and audio signals are
transmitted in digital form for high-quality editing. You cannot dub the screen
indicators.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Set the input selector on the VCR to DV IN if it is available. Refer to the
operating instructions of your VCR.
(3) Set the POWER switch to VCR on your camcorder.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR.
Dubbing a tape
DV
DV IN
DV
: Signal flow
i.LINK cable
(optional)
is marked on
this side.
VCR