Filter
Top Products
80
Notes
•The built-in light turns off automatically in the following cases:
– When you leave it on for more than five minutes with the POWER switch set to
MEMORY.
– When it stays on in the AUTO mode ( ) for more than five minutes.
– When you leave it on for more than five minutes with no cassette inserted or after
the tape has run out.
To turn the built-in light on again, press LIGHT again.
•The battery pack discharges quickly while the built-in light is turned on. Turn it off
when not in use.
•When you do not use your camcorder, turn the built-in light off and remove the
battery pack to avoid turning on the built-in light accidentally.
•When flickering occurs while shooting in the AUTO mode ( ), press LIGHT
until the indicator appears.
•The built-in light may turn on/off when you use the PROGRAM AE or backlight
function while shooting in the AUTO mode ( ).
•The built-in light may turn off when inserting or ejecting a cassette.
•The built-in light is turned off in the following cases:
– While the end search function is working
– Interval time of Interval recording
•When you use the conversion lens (optional), light from the built-in light is blocked
and may not illuminate the subject properly.
Using the built-in light