Filter
Top Products
45
Playback – Basics
You can monitor the playback picture on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder.
You can control playback using the Remote Commander supplied with your
camcorder.
(1) Install the power source and insert the recorded tape.
(2) Set the POWER switch to VCR/PLAYER while pressing the small green button.*
(3) Open the LCD panel while pressing OPEN.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two buttons on VOLUME. When you
close the LCD panel, sound is muted.
– : To turn the volume down
+ : To turn the volume up
To stop playback
Press x.
* Modes on the POWER switch vary depending on models (p. 16).
— Playback – Basics —
Playing back a tape
3
5
4
2
6
1
VOLUME
REW
PLAY
C
A
M
E
R
A
M
E
M
O
R
Y
V
C
R
O
F
F
(
C
H
G
)
POWER