Filter
Top Products
32
After recording
(1) Set the POWER switch to OFF (CHG).
(2) Close the LCD panel.
(3) Eject the cassette.
(4) Attach the lens cap.
(5) Remove the battery pack.
After using your camcorder
Remove the battery pack from your camcorder to avoid turning on the built-in light
accidentally.
Adjusting the LCD screen
The LCD panel can be opened up to 90 degrees. The LCD panel moves about 90 degrees
to the viewfinder side and about 180 degrees to the lens side (from the initial opening
position).
When closing the LCD panel, set it vertically until it clicks, and swing it into the
camcorder body.
Note
When using the LCD screen except in the mirror mode, the viewfinder is automatically
turned off.
Notes on the LCD screen
•When you use the LCD screen outdoors in direct sunlight, the LCD screen may be
difficult to see. If this happens, we recommend that you use the viewfinder.
•When you adjust angles of the LCD panel, make sure if the LCD panel is opened up to
90 degrees.
When recording with the LCD panel opened
Recording time becomes a little shorter compared with when recording with the LCD
panel closed.
Recording a picture
180°
90°