Filter
Top Products
167
“Memory Stick” Operations – Playback
Note
You may not be able to play back images with your camcorder:
– When playing back image data modified on your computer.
– When playing back image data shot with other equipment.
To play back recorded images on a TV screen
•Before operation, connect your camcorder to the TV with the A/V connecting cable
supplied with your camcorder (p. 51).
•Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
When there is only one folder on the “Memory Stick” and no image is in it
“ NO FILE” appears.
PB (playback) folder
You can select the PB folder only in MEMORY mode.
Playing back a moving picture from the desired part
The moving picture recorded on a “Memory Stick” is divided into 60 parts.
You can select any point and play back the picture.
(1) Follow steps (1) to (3) on page 166.
(2) Turn the SEL/PUSH EXEC dial and select the point where you want to start
playback, then press the dial.
R : To see the next part
r : To see the previous part
As you turn the dial to select the playback scene you want, the bar and counter
change to indicate the playback point.
(3) Press MPEG NX or SEL/PUSH EXEC dial to start playback.
(4) To adjust the volume, press either of the two buttons on VOLUME.
– : To turn the volume down
+ : To turn the volume up
To stop MPEG movie playback
Press MPEG NX or SEL/PUSH EXEC dial.
320
–– –
–– –
MOV00001
2/20
0:00:50
50
min
101
Viewing moving pictures – MPEG movie playback