Filter
Top Products
16
Installation
Chapter 2
Preparations
Removing the ribbon cartridge
1
Open the side door.
2
Pull back the latch on the ribbon cartridge to release
the lock, and then grasp the ribbon cartridge and
remove it.
If the ink ribbon breaks, you can reconnect it with a
piece of tape and use the remaining ribbon.
Immediately after printing, the thermal head inside the
unit will be hot. When removing a cartridge, do not
insert your hand into the ribbon cartridge access
opening, to prevent the risk of burns.
3
Close the side door.
Attaching the Paper Tray
Attach the supplied paper tray.
Memo
Note