Sony UP-CR10L Photo Printer User Manual


 
35
Using Index Print
Chapter 4 Operation
2
Enter the password and touch the [OK] button.
Use the numeric keypad on the screen to enter the 4-
digit password. This can be either the checkout
password or the administrator password.
If budget code input was selected at the administration
screen, enter the budget code instead of the password,
and then touch the [OK] button.
The printing process starts. When all necessary data
have been read from the memory card, a message
about removing the memory card appears. Remove the
memory card from the memory card slot.
Do not remove the memory card before this message
is shown. Otherwise data on the memory card may be
erased or corrupted. Removing and inserting an
expansion CompactFlash card during printing may
also cause improper printout.
Using Index Print
This function prints out all images on a memory card in
reduced size to provide an index of the contents.
The maximum number of images printed on a single sheet
is as follows.
3×5": 30 images
4×6": 35 images
5×7": 56 images
This function is available in Full mode and Event mode.
1
Touch any place on the screen.
The language selection screen appears.
When using Event mode, and when only one language
was selected at the administration screen, the language
selection screen does not appear. Instead, the Main
Menu appears. In this case, proceed to step 3.
2
Touch the language you want to use.
Precautions about using the unit are shown. Read these
carefully and then touch the [OK] button.
Memo
Note
Memo