Filter
Top Products
H8DI3+/I+(-F) Serverboard User's Manual
2-16
2-9 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the VGA
port) have two LEDs. On each Gb LAN port,
one LED blinks to indicate activity while the
other may be green, amber or off to indicate
the speed of the connection. See the table
on the right for the functions associated with
the connection speed LED.
LAN LED
(Connection Speed
Indicator)
LED Color Defi nition
Off 10 Mb/s
Green 100 Mb/s
Amber 1 Gb/s
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also included on
the H8DI3+/I+(-F) Serverboard. The amber
LED on the right indicates activity, while the
green LED on the left indicates the speed
of the connection. See the table at right for
more information.
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color Status Defi nition
Link
(Left)
Green:
Solid
100 Mb/s
Activity
(Right)
Amber:
Blinking
Active
Power LED
The DP4 Power LED is located near FAN4.
When this LED is lit, it means power is
present on the serverboard. Be sure to turn
off the system and unplug the power cord(s)
before removing or installing components.
Power LED (DP4)
State System Status
On Standby power present
on serverboard
Off No power connected
IPMI LED
The serverboard contains an IPMI LED
(DP5) located near the corner above the
PCI-X slots. When this LED is lit, it means a
connection is active for the built-in IPMI on
the serverboard.
Note: This LED is not installed on non-IPMI
boards.
IPMI LED (DP5)
State System Status
On Active connection
Off No connection