Filter
Top Products
4-16
H8DI3+/I+(-F) Serverboard User’s Manual
Hardware Health Confi guration
CPU Overheat Alarm
Use the "+" and "-" keys to set the CPU temperature threshold to between 65
o
and 90
o
C. When this threshold is exceeded, the overheat LED on the chassis
will light up and an alarm will sound. The LED and alarm will turn off once the
CPU temperature has dropped to 5 degrees below the threshold set. The default
setting is 72
o
C.
System Fan Monitor
Fan Speed Control
This feature allows the user to determine how the system will control the speed
of the onboard fans. The options are Full Speed/FS (Max Cooling), Perfor-
mance/PF (Better Cooling), Balanced/BL (Balance between performance and
energy saving), Energy Saving/ES (Lower Power and Noise).
Other items in the submenu are systems monitor displays for the following
information:
CPU1 Temperature, CPU2 Temperature (for 2U systems), System Tem-
perature, NB Temperature, Fan 1-8 Reading, HT Voltage, CPU1 Mem VTT,
CPU2 Mem VTT, CPU1 Mem, CPU2 Mem, CPU1/2 VCore, 1.1V, 1.5V, 5V
+12V, -12V, 3.3 Vcc, 3.3 VSB and VBAT.
ACPI Confi guration
WHEA Support
Use this setting to Enable or Disable WHEA (Windows Hardware Error
Architecture) support. WHEA provides a common infrastructure for reporting
hardware errors on Windows platforms and was designed to improve recovery
following fatal hardware errors.
PS2 KB/MS Wakeup
This setting Enables or Disables PS2 Keyboard and Mouse wakeup.
High Performance Event Timer
This setting Enables or Disables the High Performance Event Timer.