Filter
Top Products
5
Built-in Microphone: The location where the voice from your partner comes out.
SD/SDHC Card Slot: Supports SD/SDHC memory card.
2.3.2 Bottom view
¾ Power Connector: The power connector is where you connect the power adapter.
¾ RESET: Please take the following steps to reset the camera to its defaults.
Keep the camera powered on, then press and hold the Reset button for more than 15 seconds.
Afterwards release it, and the Camera will be restored to factory defaults after rebooting.
¾ Audio Out: The Audio Out port is where the speaker is connected.
¾ LAN (Network Connector): Through this port, you can connect the IP Camera to your computer or
the other Ethernet network devices.
¾ WPS: Press this button to quickly establish a connection between the Camera and the router
supporting WPS (Wi-Fi Protected Setup).