Filter
Top Products
54
→Audio Detection → Setting”)
z Network Link Down: Click it on to receive a snapshot or a video clip while network link
down. If Attached File Type (go
“Setting → Advanced → FTP Client → General”) was
clicked as video clip, you can use Alarm Buffer function as a sensor. It’s for recording
audio file in the IP CAM before and after disconnected network.
) Note:
You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced → Alarm
Buffer → Setting”)
¾ Effective Period: Set the period when the periodical sending is effective.
z Always: The periodical sending is always effective.
z Schedule: You can specify the period when the periodical sending is effective in the
Schedule setting in the other section.
) Note:
You can set schedule function at schedule screen. (Please go “Setting → Advanced →
Schedule → Setting”)
7.1.3 Periodical Sending
Select On, you can set to send an image file to FTP server periodically.
¾ Remote Path: Type the path to storage location of FTP server which you have authorized.
¾ Image File Name: Type the file name of snapshot or video clip up to 10 alphanumeric
characters, - (hyphen) and _ (under score).
¾ Suffix: Select a suffix to be added to the file name.
z None: The name of the sent file will be the Image file name.
z Date & time: The date & time suffix is added to the Image file name. The date & time suffix
consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits),
minute (2 digits) and second (2 digits), and consecutive number (2 digits), thus 14-digit