Filter
Top Products
61
z Network Storage Location: Type the IP or name of specified computer and folder. For
example, \\IP\folder name or \\my_nas:\folder name.
z Workgroup: Type the name of workgroup which the operating computer belongs.
z User Name: Type the name of workgroup. (If none, please leave it blank.)
z Password: Type the password for workgroup. (If none, please leave it blank.)
z Re-type password: Re-type password for workgroup.
) Note:
If the recording video file is assigned to be stored in a low-speed device (ex. low-speed USB storage
disk), there might be some problems to complete the storage.
How to set up the network sharing?
In the following description, we take Windows XP for example to explain how to set up the network
sharing. The detailed setup is different in various operation systems. If you have any trouble in setting
the network sharing, please ask the Technical Support of Microsoft for help.
You can create a simple Samba network sharing drive on your Windows PC by right-clicking a folder,
selecting Sharing and Security…, and selecting Share this folder. Enter a Share name you would like
to use for the folder, and then check the below box for Allow network users to change my files. After
completing the corresponding configurations of the Camera, you can click the Test button to test your
settings.
7.3.2 Alarm Sending
Set to transmit the snapshot or video clip file with connection to the alarm detection by the external
sensor input or by the built-in motion detection function.
Select On to send the file to network storage
location linked with the alarm detection.