Filter
Top Products
52
7.1.1 General
Select On when you use FTP function. The FTP client Setting screen appears.
Select Off, when you do not wish to use the FTP client function.
) Note:
The frame rate and operability on the main viewer may decrease while a file is being transmitted by the
FTP client function.
¾ Attached file Type: You can choose snapshot or video clip for alarm sending. Select
“Snapshot,” one snapshot will be transmitted to the specified FTP server while motion detection
/ audio detection triggered. Select “Video clip,” one 5-seconds video clip will be transmitted.
¾
¾ Name:
¾ FTP Server Name: Type the FTP server name to upload still images up to 64 characters, or the
IP address of the FTP server.
¾ User Name: Type the user name for the FTP server.
¾ Password: Type the password for the FTP server.
¾ Re-type Password: To confirm the password, type the same characters as you typed in the
Password box.
¾ Passive Mmode: Set whether you use the passive mode of FTP server or not when connecting
to FTP server. Select On to connect to FTP server using the passive mode.
¾ Test: After setting the FTP server information, you can tick the test key to test if the connection
between IP CAM and FTP server works.
7.1.2 Alarm Sending
Set to forward a snapshot or video clip file to the specified FTP server linked with the alarm detection by