Vivotek ST7501 Security Camera User Manual


 
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 39
Manually Start to Record/Stop Recording
By default setting, all devices are assigned to the default recording group and default recording
schedule� Therefore, once you insert a device to the station, the ST7501 server will begin to
record live video according to the default recording schedule� (Please refer to How to Edit
Recording Schedules on page 40�)
However, if you have changed the default schedule and in any emergency, you can manually
click to enable a device start to record without setting up a recording schedule� Please follow
the instruction below to manually enable recording�
Click the device on the device tree under Default Group, and then click Edit > Start to Record
on the menu bar (or right-click the device, and then select Start to Record)� The string on the
menu bar will turn into Stop Recording as below� The ST7501 server will start to record video
from the target camera� Please note that its priority will be higher than a recording schedule, so
it won't stop unless you click Stop Recording. After you click Stop Recording, the device will
then follow the recording schedule�