Filter
Top Products
11 Frequently Asked Questions
Tapping and writing problems
274
Tapping and writing problems
Problem Solution
The LED indicator is not blinking when
alarms occur.
Check the Alarm LED setting. See "To set the alarm LED settings"
on page 233.
My handheld has frozen. Perform a soft reset. For instructions, refer to "Performing a soft
reset" on the Acer s50 and s60 Handhelds Quick Guide.
Problem Solution
When I tap the buttons or screen icons,
my handheld activates the wrong
feature.
Calibrate the screen. See "Digitizer preferences" on page 244.
When I tap the Menu icon , nothing
happens.
Not all applications or screens have menus. Try changing to a
different application.
I cannot get my handheld to recognise
my handwriting.
• For your handheld to recognise handwriting input with
the stylus, you need to use Graffiti writing. See "Entering
data using Graffiti" on page 1.
• Make the Graffiti character strokes in the Graffiti writing
area, not on the display part of the screen.
• Write Graffiti strokes for letters in the left-hand side, and
the strokes for numbers in the right-hand side of the
Graffiti writing area.
• Make sure that Graffiti is not shifted into extended or
punctuation modes. See "Entering data using Graffiti" on
page 1.
• See "Graffiti tips" on page 8 for tips on increasing your
accuracy when you write Graffiti characters.