Filter
Top Products
UVS-7111 User's Manual
Camera Setting from a Router
You can use DHCP when you want to use the video server on the Intranet (LAN). However,
the IP must xed when you want to use the product on a WAN. For this application, it is
required to set up a virtual server on the ADSL router. Follow the steps below to complete
the setting:
1. Enter the camera setting page to set a xed IP. (Refer to the “Network Setting”.)
Ex.: 192.168.0.49
2. Enter the ADSL router main setting page.
Ex.: Zonet ADSL router
3. Enter the Virtual Server setting page.
a. Set “mapping of HTTP Port (80) to 192.168.0.49 ”.
b. Restart ADSL router
.
After completing the settings, you can operate the camera from a WAN IP Address via the
ADSL router.
Note:
The virtual server setting screen is not the same for all ADSL routers. Refer to the manual of
the ADSL router you purchased for more information about the setting.
11
Camera Setting from a Router