Active Thermal Management UVS-7111 Security Camera User Manual


  Open as PDF
of 68
 
UVS-7111 User's Manual
Notication setting
Basic Setting > Network > Notication Of IP Address Change
(IP address change notice)
This setting is not necessary for a xed IP. For a dynamic IP, you need to update the IP address
every time you connect to the Internet to access the camera. This setting allows you to update the IP
address by the automatic notication of IP address change. Choose one of the following three notice
options to update the IP address:
1.Notication via SMTP mail server
◦ Basic Setting > Network > Notication of IP Address Change > SMTP Notication
SMTP Notication: notication via SMTP mail server
SMTP SendTo: the recipient, i.e. xxx@xxx.com
SMTP Subject: mail subject
Select Save to complete and activate your settings.
2. Notication via FTP server
◦ Basic Setting > Network > Notication of IP Address Change > FTP Notication
FTP Server: FTP Server name.
FTP Port: FTP port. The default setting is 21 (recommended).
FTP Upload path: the path to upload les.
FTP Login name: the name to log in the FTP.
FTP Login Password: the password to log in the FTP.
Select Save to complete and activate your settings.
3. Notication via HTTP server
◦ Basic Setting > Network > Notication of IP Address Change > HTTP Notication
Server: the address of the server, i.e. http://.
Port: the port to access HTTP. The default setting is 80 (recommended).
Parameter: the setting of the parameters, refer to the installation setting of your HTTP server.
Refer to the installation setting of your HTTP server for the setting of the parameters (such as
Username, Password, and Proxy).
Select Save to complete and activate your settings.
49
Basic Setting
 previous next