Filter
Top Products
UVS-7111 User's Manual
Basic Setting > Network (Network setting)
Basic Setting > Network > Network (cable network setting page)
◦ Basic Setting > Network > Network > IP Assignment
DHCP setting:
DHCP(Dynamic Host Configuration Protocol) is a protocol that enables automatic assignment of
TCP/IP information to the client. Each DHCP client connects to the DHCP server to access its
network setting information, including IP address, gateway, and DNS server.
The IP address of the camera is 192.168.0.20 by default when DHCP is "OFF". When you select
"DHCP ON" and access the DHCP network environment, the camera will automatically send a
DHCP packet to request an IP address. This IP address is assigned automatically from the DHCP
server on the network. No additional settings are required for this page unless you need to change
the network conguration. The DHCP status of the camera is "OFF" by default.
Other settings:
For IP address, Subnet mask, Default gateway, DNS 1, and DNS 2, the DHCP server will assign
these values automatically when DHCP is in "ON" status; otherwise, you need to key in the values
manually.
Note: Where no IP address is assigned from the DHCP server, the system will set the Link-Local Address
automatically. Chunghwa Telecom DNS: 168.95.1.1
Cable network setting page
36
Basic Setting