Filter
Top Products
UVS-7111 User's Manual
Then change the settings on the wireless networking setting page to make them conform to the
settings of the base station.
WEP security mode: Select an encryption mode from the list. The format is “None” by default,
indicating that the security function is disabled.
Authentication mode: One of the following authentication modes is required when you select a WEP
encryption mode from the security list.
1. 64 Bit (10 Hex chars)
2. 64 Bit (5 ASCII chars)
3. 128 Bit (26 Hex chars)
4. 128 Bit (26 ASCII chars)
WEP key password encryption mode:
You can set up 64 Bit or 128 Bit WEP key password encryption mode. A set of 64 Bit encryptions is
equivalent to 10 sets of hexadecimal digits or 5 sets of ASCII characters. A set of 128 Bit encryptions
is equivalent to 26 sets of hexadecimal digits or 13 sets of ASCII characters.
Encoding
Available characters
64 Bit
128 Bit
HEX
0~9, a~f, A~F
10
26
ASCII
0~9, a~f, A~Z
5
13
40
Basic Setting
Base station with enabled
encryption function
Encryption mode
Encryption authentication type
Encryption group