Active Thermal Management UVS-7111 Security Camera User Manual


 
UVS-7111 User's Manual
Mode: Selection of the wireless networking mode
1. Infrastructure: Infrastructure networking mode
Thiscamera uses the wireless Access Point (AP) as the hub when set to infrastructure networking
mode and connects to the network via the wireless AP.
2. AdHoc: Point-to-point networking mode
This camera connects to other wireless devices via a wireless network when it is in the AdHoc
point-to-point networking mode; i.e. the product connects to other devices equipped with built-in
wireless connection function without the need to access from any AP.
Note: Where no IP address is assigned from the DHCP server, the system will set the Link-Local
Address automatically.
Authentication Type: Network authentication type
1. Open System: No encryption.
2. Shared Key: Security of data is highly protected by encryption during transmission.
Note: Refer to the user setting instructions of your wireless IP sharer for more information.
38
Basic Setting
INTERNET ADSL MODEM BASE STATION
WORKSTATION 1
WORKSTATION 2
Infrastructure networking mode AdHoc networking mode
Network authentication type