Filter
Top Products
UVS-7111 User's Manual
Application Setting > Event > Trigger (manual test of trigger
response)
Whenever the camera detects abnormal events during the scheduled time, it will automatically respond by
performing trigger response. There are 3 types of trigger responses: alarm sending, LED status indicator
ash, andemailing the alarm or recorded image to the specied server. To use this function, enter the server
information by accessing Application Setting > Event > Event Server. You may perform manual test as specied
in this section once you complete the setting to ensure that all functions are working properly.
Trigger Alarm output: Alarm output
Click “Set” to trigger the alarm. Click “Clear” to stop the alarm.
Trigger LED: LED indicator display
LED: Event status: click “Set” to turn on the LED event status indicator. Click ”Clear” to turnoff the indicator.
LED: Link status : click “Set” to turn on the LED Link status indicator. Click “Clear” to turnoff the indicator.
Trigger mail: Sending mail
Click “Set” after you enter the email address and subject to test the integrity of the sent mail.
Trigger FTP: Sending AVI le to FTP Server
Upload AVI les to FTP server to test the le integrity.
HTTP Server: Sending message to HTTP Server
Upload message to HTTP server to test the message integrity. Enter the message in the “Message” eld. You
may go to Application Setting > Event > Event Server to make a complete custom parameters settings.
TCP Server: Sending message to TCP Server
Enter the message in the “Message” eld.
Trigger SAMBA: Sending message to Samba shared folder
Path: Enter the path of the shared folder in your PC.
54
Basic Setting