Filter
Top Products
LEVEL 2 - 320 X 32, Three Bay System
A three bay, Level 2 system allows a maximum of 320 video
inputs switched to a maximum 32 video outputs. Bay one
consists of 256 video inputs for the first 16 video outputs and
bay two consists of 256 video inputs for the second group of
16 video outputs. Bay three, a 2020R Condensed bay, consists
of 64 video inputs for both groups of outputs.
From the rear of bay one, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-11 with 16 BNCs for
connection to the 2024VOM-1 modules in bay three, followed
by sixteen 2016AVIM-2 modules, inputs 1 - 256.
From the rear of bay two, the modules are installed at the
factory in the following manner; the far right module is the
2010PS, the next module is the 2010DB-12 with 16 BNCs for
connection to the 2024VOM-1 modules in bay three, followed
by sixteen 2016AVIM-3 modules, inputs 1 - 256.
From the rear of bay three, the modules are installed at the
factory in the following manner; the far right module is the
2010PS; the next module is the 2010DB-00, followed by four
2016AVIM-2 modules for inputs 257 - 320, and four
2024VOM-1 modules for outputs 17 to 32. The next modules
to the left are four 2016AVIM-3 modules for inputs 257 - 320,
followed by four 2024VOM-1 modules for outputs 1 to 16.
Smaller matrices, such as those ordered with future expansion
in mind, may have fewer modules installed.
IDENTIFY THESE MODULES CAREFULLY
BEFORE PROCEEDING.
Data Interconnect: See Level 2, 192 X 32, two bay system.
Connect all bays in a similar manner.
Video Interconnections: The 16 video outputs from bay 1,
located on the rear panel of the 2010DB-11, are grouped by
fours and identified by the icon.
On bay 3, each 2024VOM-1 is similarly grouped with three
sections of four BNCs, with identifying icons. A fourth
section of four BNCs is used for video output connections.
See Figure 21, Video Output Module, page 9.
Using high grade RG-59U video cables, connect the topmost
BNC from bay 1 on the 2010DB-11 panel, numbered 1, to the
top-most input BNC, labeled 1 for the 2024VOM-1 in bay 3,
for output 1, matching icon to icon.
Continue in this manner until connections 1-4 of the 2010DB-
11 panel are connected to inputs 1-4 of the first 2024VOM-1.
Proceed to the next group of four BNCs on the 2010DB-11 of
the first bay and connect these four to the second 2024VOM-1
for outputs 5-8. Continue in this manner until all 16
connections of the 2010DB-11 panel are connected to the
2024VOM-1 modules.
Connect bay 2 in a similar manner to the 2024 VOM-1
modules of bay 3 for video outputs 17-32, matching icon to
icon.
See Appendix Figure A18, Video Interconnections, for
illustration of these connections.
If there are less than eight 2024VOM-1 modules in the system
the remaining BNCs on the 2010DB-XX do not require any
connection.
Video Input Connections: See LEVEL 2 - 192 X 32, Two
Bay System and connect in a similar manner.
Video Output Connections: See LEVEL 2 - 192 X 32, Two
Bay System and connect in a similar manner.
In the Appendix, see Figure A8, 448 X 32, Four Bay System.
SYSTEM CONFIGURATIONS
29