Asante Technologies 8001/P/W Digital Camera User Manual


 
Important Safety Instructions
Before operating this machine, please read the entire manual thoroughly.
This unit is designed to be used as surveillance appliance for transporting sounds and images to and
from other locations across various interconnects. The manufacturer designed, built, and tested this
product for use indoors, using nominal local voltages. Outdoor operation or use of different voltages could
damage the unit or peripheral equipment or create a potentially unsafe operating condition
Important Safeguards
Use close supervision when using or allowing children to use any appliance.
To avoid electrical shock or damage, always unplug appliance from electrical outlet before cleaning
and servicing. Grasp plug and pull to disconnect.
To reduce the risk of electric shock, do not immerse this appliance in water or other liquids, or place
liquids on it.
To reduce the risk of electric shock, do no disassemble this appliance. Use factory repairs only
when service or repair work is required. Incorrect reassembly can cause electric shock when the
appliance is subsequently used.
The use of an accessory attachment not recommended by the manufacturer may cause a risk of
fire, electric shock, or injury to persons.
To reduce the chance of electrical shock, connect this appliance to a grounded outlet.
Extension cords rated for less amperage than the system is rated may overheat and cause a fire.
If an extension cord is necessary, a cord with a current rating at least equal to that of the system
should be used.
Operating a system with a damaged cord, or if the appliance has been dropped or damaged, could
cause electrical shorts and overheating, resulting in fire. Do not use until it has been examined by
a qualified service technician.
Position cords so that they will not be tripped over, pulled, or contact hot surfaces.
Keep ventilation openings free of any obstructions to avoid overheating and possible damage or
fire.
To avoid electrical shorts, damage, or shock, do not spray liquids directly on to the system when
cleaning. Always apply the liquid first to a static free cloth.
Lighting storms can cause voltage spikes on power and telecomm lines. In case of lighting storms,
please make sure the system connect to surge protected outlets.
Safety Notices
Please observe all safety markings when using this product.
Caution! - Potential hazard that can damage the product.
Important! - Potential hazard that can seriously impair operation.
Do not proceed beyond any of the above notices until you
have fully understood the implications.
SAVE THESE INSTRUCTIONS
©2007 Asante Networks Inc., All rights reserved. NetCam are registered trademarks of Asante Network, Inc.
2
All other names may be trademarks or registered trademarks of their respective owners. Specifications subject to change without prior
notice.