Filter
Top Products
Motion Detection
You can open the setting frame by clicking on the area to monitor. To set the area to monitor,
you can adjust the size of the frame by dragging the pointer to the frame edge and adjust
after you move the mouse to the desire location.
There are 3 frames available for setting. You may adjust the sensitivity of the area by
entering the degree of sensitivity in the “Sensitive” field. “1” is the least sensitive, and
the ”100” is extremely sensitive.
Note 1 – 100 level of sensitivity may conduct too many false alarm due to ay light
change will cause the alarm. This is not highly recommended for detect any moving
object. Default is 60.
Note 2 – If you would like to set 3 areas separately and treat it as independent event.
You can create 3 different events accordingly.
Select Save to complete and activate your settings.
©2007 Asante Networks Inc., All rights reserved. NetCam are registered trademarks of Asante Network, Inc.
All other names may be trademarks or registered trademarks of their respective owners. Specifications subject to change without prior notice.
63