Filter
Top Products
Notification
This setting is not necessary for a fixed IP address configuration. For a dynamic IP, you need
to update the IP address every time you connect to the Internet to access the camera. This
setting allows you to update the IP address by the automatic notification of IP address change.
Choose one of the following three notice options to update the IP address:
1. Notification via SMTP mail server
SMTP Notification
SMTP Notification: notification via SMTP mail server
SMTP Send To: the recipient, i.e. xxx@xxx.com
SMTP Subject: mail subject
Select Save to complete and activate your settings.
2. Notification via FTP server
FTP Notification
FTP Server: FTP Server name.
FTP Port: FTP port. The default setting is 21 (recommended).
FTP Upload path: the path to upload files.
FTP Login name: the name to log in the FTP.
FTP Login Password: the password to log in the FTP.
Select Save to complete and activate your settings.
3. Notification via HTTP server
HTTP Notification
Server: the address of the server, i.e. http://.
Port: the port to access HTTP. The default setting is 80 (recommended).
Parameter: the setting of the parameters, refer to the installation setting of your HTTP
server.
Refer to the installation setting of your HTTP server for the setting of the parameters (such
as Username, Password, and Proxy).
Select Save to complete and activate your settings.
©2007 Asante Networks Inc., All rights reserved. NetCam are registered trademarks of Asante Network, Inc.
All other names may be trademarks or registered trademarks of their respective owners. Specifications subject to change without prior notice.
52