Filter
Top Products
Note: You can not interrupt and power off the network camera while it is process of
upgrading. The system may be damaged severely and may need to RMA for repairing.
Firmware upgrading in a
wireless network environment is not recommended.
When the firmware upgrade has been completed, you don't need to restart the camera
manually. The camera will reboot automatically after 60 seconds (Reboot OK). Then open
the IE browser and key in the IP address (The original IP address remains undeleted).
©2007 Asante Networks Inc., All rights reserved. NetCam are registered trademarks of Asante Network, Inc.
All other names may be trademarks or registered trademarks of their respective owners. Specifications subject to change without prior notice.
66