Filter
Top Products
Tour : Device could be arranged by automatically “touring” each “preset location” with still stand
at that location for a dwelling timer. The timer is configurable. Procedure describes as
follow:
1) Select SET, a sub window will popup
2) Select Location Number from sub windows and enter the position name.
3) Control camera wheel to desire location for this position identity
4) Click “Update” and “exit”.
5) You may test by select number on control panel and press “go”. Camera will speedy
to turn to that location you set easier.
AutoPan: Device could be paned automatically from left to right and right to left until you disable
it.
Alert Message: Enable/Disable button is to enable or disable alert message (Max 50 message).
When you leave this page, the alert messages will not be saved. Detail alert message,
please refer to setting-=>application setting-=>event.
Save AlertingImg: Enable/Disable button is to enable or disable save alert image to the directory
of SNAPSHOT defined at Path.
Please refer to Setting/Application Setting/Event/Event for more detail.
©2007 Asante Networks Inc., All rights reserved. NetCam are registered trademarks of Asante Network, Inc.
All other names may be trademarks or registered trademarks of their respective owners. Specifications subject to change without prior notice.
25