Filter
Top Products
31
AXIS 213 - Setup
Output Buttons - These buttons can then be used to manually start and stop an event
from the Live View page, e.g. switch a light on/off:
• The Pulse button activates the port for a defined period
• Active/Inactive displays 2 buttons, one for each action (on/off)
Default Video Format in Internet Explorer for Windows - Select default video
format from the drop-down list. Check the box to enable video format selection on
the Live View Page. When using MPEG-4 as video format, the default viewer is AXIS
Media Control with Internet Explorer.
AMC Settings - Uncheck the Show viewer toolbar checkbox to remove the AMC
(Axis Media Control) viewer toolbar under the image on the live view page.
Uncheck the Enable MPEG-4 decoder installation checkbox disable the installation
of the MPEG-4 decoder included with AMC.
Check the Show red cross in PTZ joystick mode checkbox to show a red position
indicator on the live view page when the joystick navigation mode is selected.
Default Viewer for your Browser - select the appropriate radio button to define your
method for viewing moving images depending on your Web browser and settings.
Please use the online help files for details.
HTML Examples
You can add live video from your AXIS 213 to your own website. The AXIS 213 can
send Motion-JPEG to up to 20 simultaneous connections, although an administrator
can restrict this to fewer. If MPEG-4 is set as video format, multicasting is used and
the video stream will be available for an unlimited number of viewers connected to
the parts of the network where multicast is enabled. Please note that a separate
MPEG-4 license is required for each viewer.
It is possible to select the Image Type, Image size and Optional settings to suit your
Web page when using Motion JPEG.
Copy the source code as displayed on the HTML examples page and paste it into your
own HTML code.
Please see the online help for more information.