Filter
Top Products
32
AXIS 213 - Setup
PTZ Configuration
Preset Positions
A preset position is a pre-defined camera view than can quickly and easily be viewed.
From Preset Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer the
camera to the required position. When satisfied with the camera's position, enter a
descriptive name. This camera position is then saved as a preset position.
The AXIS 213 will take the exact
position when the preset's name is
selected from the Preset positions
drop-down list. Preset positions can
be selected in Live View, from
events and in Sequence mode.
One position can be set as the Home
position, which is readily accessible
by clicking on the Home button in
both the Preset Position Setup
window and the Live View window.
The position's name will have (H) added, e.g. Office Entrance (H).
Sequence Mode
The Live View page can be configured to rotate through the selected preset positions,
in a set order or randomly.
Select the desired preset positions and enter the time to display each position. Click
Save.
The Sequence buttons will appear on the Live View page to enable the
viewer to start and stop the sequence mode.