Filter
Top Products
9
AXIS 213 - Accessing the camera
Setting the Password
1. When accessing the camera for
the first time, the ‘Configure
Root Password’ dialog will be
displayed on the screen.
2. Enter a password and then
re-enter it, to confirm the
spelling. Click OK.
3. The ‘Enter Network Password’ dialog will appear. Enter the User name: root
Note: The default administrator user name root is permanent and cannot be
deleted or altered.
4. Enter the password as set in step 2 above, and click OK. If the password is
lost, the camera must be reset to the factory default settings. See page 47.
5. If required, click Yes to install the AXIS Media Control (AMC). You will need
administrator rights on the computer to do this.
Accessing the camera from the Internet
Once installed, the camera is accessible on your local network (LAN). To access the camera from the Internet you
must configure your router/firewall to allow incoming data traffic. For security reasons this is usually done on a
specific port. Please refer to the documentation for your router/firewall for further instructions.
For more information, please visit the AXIS Internet Dynamic DNS Service at www.axiscam.net or, for Technical
notes on this and other topics, visit the Axis Support Web at www.axis.com/techsup