Filter
Top Products
47
AXIS 213 - System Options
Resetting to Factory Default Settings
To reset the AXIS 213 to the original default settings, go to the System Options >
Maintenance web page (described in
Maintenance, on page 45) or use the Reset
button on the AXIS 213 as described below:
Using the Reset Button
Follow the instructions below to reset the AXIS 213 to factory default settings using
the Reset Button.
1. Switch off the AXIS 213 by disconnecting the external power supply.
2. Using a suitably pointed object, press and hold the Reset button while you
reconnect the power connector.
3. Keep the Reset button pressed for approximately 15 seconds.
4. Release the Reset button.
Note:
Resetting to the factory default settings using the Reset Button will cause all parameters (including
the IP address) to be reset. Refer to Maintenance, on page 45 for other methods that do not reset the
IP address.