Filter
Top Products
43
AXIS 213 - System Options
Use manually selected NAT router - Select this option to manually select a NAT
router. Enter the IP address for the router in the field provided.
If a router is not manually specified, the AXIS 213 Network Camera will automatically
search for NAT routers on your network. If more than one router is found, the default
router will be selected.
Alternative HTTP port - Select this option to manually define an external HTTP port.
Enter the port number in the field provided. If no port is entered here a port number
will automatically be selected when NAT traversal is enabled.
RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Enter the
RTSP port number to use. The default setting is 554.
Network Traffic
The default setting is Auto-negotiate which means that the correct speed is
automatically selected. If necessary, you can set the connection speed by selecting it
from the drop-down list. 10BaseT (Half/Full Duplex), 100BaseTX (Half/Full Duplex).
Maximum bandwidth - Specify, in Mbit/s or Kbit/s, the maximum bandwidth that the
AXIS 213 is allowed to use on your network. This is a useful function when
connecting the AXIS 213 to busy or heavily loaded networks. The default setting is
Unlimited.
For more information, please refer to the online help files
Network - SOCKS
SOCKS is a networking proxy protocol. The AXIS 213 can be configured to use a
SOCKS server to reach networks on the other side of a firewall/proxy server. This
functionality is useful if the AXIS 213 is located on a local network behind a firewall,
but notifications, uploads, alarms, etc., need to be sent to a destination outside the
local network (e.g. to the Internet).
Network - SMTP (email)
(Simple Mail Transfer Protocol) Enter the host names or addresses for your primary
and secondary mail servers in the fields provided to enable event and error email
messages from the AXIS 213 to predefined addresses, via SMTP.