Bosch Appliances VEZ-400 Security Camera User Manual


 
VEZ-400 Mini PTZ Dome Connection | en 23
Bosch Security Systems, Inc. User Manual F.01U.252.635 | 2.0 | 2011.09
Use the following illustration as a guide for preparing and
connecting the wiring:
Figure 6.1 Typical wiring configuration
Note: The box around several objects in the graphic above
indicates that those devices are supplied separately.
6.1 RS-485 Connections
The camera can be controlled by an external device or control
system using an RS-485 duplexer. The total length of the cable
for communication should not exceed 1 km (3937 ft). If the
distance between the camera and the control room is greater
than 1 km (3937 ft), Bosch recommends using a repeater (not
supplied).
124 VAC Power In
2 Power connector with screw terminals
3 Power adapter (supplied separately)
(24 VAC, Peak 2.5 A)
4 8-pin I/O terminal (Alarm In/Out)
5 2-pin data terminal (RS-485 Connection)
6Video Out (Female BNC connector)
7 Video In to monitor (Male BNC connector)
8 CCTV Monitor
9 Bosch keyboard controller