Filter
Top Products
VEZ-400 Mini PTZ Dome On-Screen Display (OSD) Menu | en 37
Bosch Security Systems, Inc. User Manual F.01U.252.635 | 2.0 | 2011.09
2. Select OSD SETUP. The screen OSD SETUP appears.
3. Select the option "Label Position" to set/change the
position of labels.
4. Select the value "On" to display the label position.
5. Press the button {Tele} to edit the position of labels.
6. Use the joystick to move the label up, down, left, and/or
right.
7. Save the option.
8. Select any of the following labels to display:
– Title (Label Position)
– (Dwell) Time
– Zoom (ratio)
–(Camera) ID
– (Operation) Mode
– (PTZ) Angle
Note: You can display only selected video or characters in
the video. Each element may be configured.
9. Save the option.
7.4.2 Privacy Zone
A Privacy mask zone allows an administrator to program a four-
sided, user-defined zone which cannot be viewed by operators.
A maximum of 15 positions can be displayed on the monitor.
The mask will stay in position even with changing pan and tilt
angles, and will adjust in size according to the zoom ratio [Tele/
OSD SETUP
LABEL POSITION
TIME
ZOOM
ID
MODE
ANGLE
SAVE
BACK
- CHANGE
- TO SETUP