Filter
Top Products
VEZ-400 Mini PTZ Dome On-Screen Display (OSD) Menu | en 51
Bosch Security Systems, Inc. User Manual F.01U.252.635 | 2.0 | 2011.09
7.6.4 Calibration
Calibration is a function for automatically correcting an error on
the angle of Pan/Tilt. Calibration can be set at Auto or Manual.
In Auto mode, the camera is corrected automatically whenever
there is an error on the angle of the camera. The motor of the
Pan/Tilt will adjust its angle automatically. In Manual mode,
select the option "Calibration" to execute the function.
Error Message Display is a function for displaying an error
message to let a user know when there is an error.
1. From the MAIN MENU, select DOME MOTION. The
submenu DOME MOTION appears.
2. Select CALIBRATION. The screen CALIBRATION SETUP
appears.
3. Select the option "Auto Cal". This function is for automatic
calibration.
4. Select the appropriate value: AUTO or MANUAL.
5. In Manual mode, select the option "Calibration" to execute
the function using the joystick.
6. Select the option "Yes" or press the [Near] button to
continue.
7. Select the option "Error Msg Disp" (Error Message
Display).
8. Select the appropriate option: ON or OFF.
9. Save the settings.
CALIBRATION SETUP
AUTO CAL
ERROR MSG DISP
CALIBRATION
SAVE
BACK