Filter
Top Products
VEZ-400 Mini PTZ Dome On-Screen Display (OSD) Menu | en 53
Bosch Security Systems, Inc. User Manual F.01U.252.635 | 2.0 | 2011.09
7.8 Pattern Setup
A Pattern is used to display (or recall) a memorized, repeated
and serial trace of pan, tilt, and zoom. The camera has a
maximum of 8 Patterns in Pelco protocol mode, and 2 Patterns
in Bosch protocol mode. Each of the user-defined scans
includes Pan/Tilt/Zoom. To set up (program) a Pattern:
1. From the MAIN MENU, select PATTERN SETUP. The
screen PATTERN SETUP appears.
2. Select the option "NO.###" to select a pattern number.
3. Select the appropriate pattern number.
4. Select the option "Edit." A second screen PATTERN SETUP
appears.
5. Using the joystick, move to a desired target.
6. Press the button [Near] to begin programming.
7. Using the joystick, record the scene. Note that ’Time’
means recorded time. The maximum amount of time
available for recording is 60 seconds.
8. Save the settings.
Note: Select the option "Clear" to delete the pattern.
PATTERN SETUP
NO.
EDIT
TITLE
TIME
CLEAR
SAVE
BACK
NOTICE!
You can also edit the Pattern title. Select the option "Title,"
then edit the title following the steps in Section 7.2.1 Editing
Titles, page 32.