Filter
Top Products
50 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome
F.01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc.
1. From the MAIN MENU, select DOME MOTION. The
submenu DOME MOTION appears.
2. Select HOME ACTION. The screen HOME ACTION SETUP
appears.
3. Select the option "Action."
4. Select the appropriate value:
–Home
– Preset
–Scan
–Tour
5. Select the option "Number."
6. Set the number for the action. For example, if "Action" is
"Preset" and "Number" is "001," this means Preset 1.
7. Select the option "Time." This is the dwell time, the
amount of time that the joystick controller can be idle
before the camera returns to Home, a preset, a scan, or a
tour.
8. Set the desired dwell time (from 1 second to 60 seconds
and from 1 minute to 60 minutes).
9. Select the option "Mode."
10. Select the appropriate value: Off (Manual) or On (Auto).
11. Save the settings.
NOTICE!
In order to call an action (Preset, Pattern, Tour, or Scan), you
must configure Preset, Pattern, Tour, or Scan first.
HOME ACTION SETUP
ACTION
NUMBER
TIME
MODE
SAVE
BACK